Industrial coatings 3

Alkyd deck paint is made of alkyd resin as base material and added inorganic pigment. After grinding, it is mixed with proper amount of drying agent and organic solvent.



The main characteristics of



Excellent adhesion.



Excellent water resistance and wear resistance.



Recommended uses



Suitable for coating ships, steel, and wooden surfaces on decks.



The reference index



The film the color and appearance of                         accords with standard, smooth, and in the color range of



The viscosity of S / (TU -4 cup)                                   ≥ 60



The fineness of /μ m                                                            & nbsp;   ≤ 40



Drying time (25± 1 degrees, relative humidity of 65± 5%):

            dry / h                                                          4



              work / h                                                        24



The adhesion /                                                             & 2


Gloss /%                                                                80


Reference to the construction of



Surface treatment   the front paint shall be completely dry, except for all the oil and dirt on the paint.



The construction conditions:

· relative humidity &le: 80%, should not be in rainy days, fog or sand occasions construction, otherwise it will affect the film properties.



· the base temperature must be above 3 degrees above dew point.



· outdoor construction should avoid the bottom material by the sun straight.







Supporting the use of


Preceding coat: iron red epoxy antirust paint, iron red alkyd antirust paint.




coating


Recommended dry film thickness ≥ 70 μ m, painted 1~2 road.



Time interval of paint coating should be as short as possible, recoating interval is more than 48 h, can be in the removal of surface oil and


Painting after impurities and soot blowing.



When in use, mix the paint evenly before using the 100 mesh screen and then use it.



If the viscosity is too large, you can join our company's production of alkyd diluent, the amount is generally not more than 10% of the amount of paint.



When spraying each should be covered before the 30~50%, in order to avoid leakage of injection, resulting in pinhole and uneven thickness, also should not be too far away from the gun, in order to avoid the formation of dry spray gun, suggestions and to be coated in about 30 cm spacing.



In the process of coating and coating, it is strictly prohibited to contact with water, acid and alkali.



  storage;    



It must be carried out in accordance with HG/T2458-93 general rules for inspection, transportation and storage of coating products.



Products should be kept airtight, ventilated, dry, no direct sunlight exposure, storage environment temperature should be at 0~35 degrees.



The effective storage period of the product is 12 months. The inspection shall be carried out according to the standards specified in the product when the storage period is exceeded. If the result meets the requirements, the product can still be used.



Health and safety:

Must comply with national standards and procedures for painting safety work.



Use in a well ventilated environment. Avoid inhalation of paint mist and avoid skin contact. Paint splashed on the skin. Rinse immediately with proper detergent and water. Splash eyes, rinse thoroughly, and seek medical attention immediately.